For example, chain with a marketing number of 33 rs3: Stihl uses a marketing number system in addition to the part number.
We recommend using the size in inches.
How to measure chainsaw chain stihl. When you are measuring the chainsaw bar, it is actually easy. If they fit, check also the position of the chain tensioner holes. Yes, that’s kind of a complicated measurement, but luckily, most chainsaws display this measurement somewhere on the tool or in the user manual.
Usually, there is difference a between the cutting length and the total length of 2 to 3 inches. How to measure a stihl chainsaw bar? That’s because chainsaw chains actually have three measurements:
This will give you how long the bar should be. This is an easy measurement. To measure a chainsaw chain you need to find the pitch, gauge, and link count.
To determine the chainsaw bar size, simply take a tape measure to measure from the motor housing body, down the length of the bar to the tip of the bar. Another important thing is the position of the chain lubrication hole. Furthermore, what size chain is on my stihl chainsaw?
To determine the chain gauge, you can use this simple trick: Stihl uses a coding system that consists of a single digit or letter and that describes the chain's characteristics. Then, round up to the next even figure.
The most commonly used chainsaw bar sizes are 11 ″, 12 ″, 13 ″, 14 ″, 15 ″, 16 ″, 18 ″, 20 ″, 21 ″, 22 ″. You have to unscrew them with a ratchet and then the entire bar will be appear. Find the cutting length of the chainsaw bar by laying a tape measure at the very tip of the chain.
How to measure chainsaw chain stihl. Or, if you are unsure about the real length, you can take it off, and take the bar to the hardware store for replacement. Round up to the nearest inch.
The drive link is the bottom part of the chainsaw chain (see picture below). Now measure the total length of the bar from the very end up to the tip with the same measuring tape. Gauge measures the thickness of the drive links if you were to look at them along the length of the chain.
When measuring the chain of your chainsaw, you have to measure its gauge, pitch, and drive links. The stihl company stamps its chains with a number, called a marketing number, that will help you identify the size of the chain. Identify the number printed in both millimeters and inches.
You can manually count the drive links in your chainsaw. Count the drive links — count the individual links on the chain one by one. As a matter of fact, replacing the chain of your chainsaw is extremely important because your chainsaw won’t cut properly if you have damaged chains.
You’ll measure just until the bar disappears into the chainsaw body in order to find the cutting length. Measure from the first to the third, then divide that number in half to get your chain pitch. Or, if you are unsure about the real length, you can take it off, and take the bar to the hardware store for replacement.
You are measuring the bar from side to side. Chainsaw chains are available in the following pitch sizes, measured in inches: Keep the number from step three on hand to.
Gauge measurement the parts of chainsaw chains that fit into the saw's guide bar are called the drive links. This number will likely be to the right of either the brand name or the drive link number. From the one end to the next.
Measure the area of the chainsaw where the bar comes out of the body. In addition to the length of the guide and the width of the chain gauge, you should also take care of the width of the holes for the screws that tighten the guide rail to the chainsaw. Find a quarter, a dime, and a penny.
3/8″ pitch chains are the most common pitch size, and 3/8. Beside above, what do the numbers mean on a chainsaw chain? This information can be found on the information stamp on the chainsaw bar, through the numbers on the chain, or through measuring your chain manually.
Typically, chainsaw guide rail size is indicated in inches, sometimes in centimeters. Stihl typically sells chains with one of three pitch measurements: You are measuring the bar from side to side.
This allows easy identification of any chain. Count the number of drive links. One of the parameters of the guide is its size.
This measurement refers to the. Number of drive links, pitch, and gauge. The most common measurements of pitch you'll see on replacement chain are 3/8 and.325.
The proper way for how to measure a chainsaw chain length is as follows: General chain lengths, like 18 inches, are not interchangeable.